Product

High Speed Door

C-1
Model C-1
Format Standard
Benefits Most popular product line. Equipped with high strength wind-bar, wind-bar locks which prevents separations under high wind conditions. Easy sheet installation makes it efficient to replace individual sheets of damaged sheets caused by vehicles and equipment. Designed for easy exchange between winter and summer sheets
C-2
Model C-2
Format Slim
Benefits Motor is installed inside the drum unit which enables to create additional space around the motor unit. Water resistant. Convenient to install in limited spaces such as hallways and walkways​
C-3
Model C-3
Format Self-recovery
Benefits Premium class high speed auto door system. Most popular and designed for high traffic areas. It comes with auto door recovery system which repairs the doors caused by impacts against forklifts and moving equipment. Minimize the repair cost. Suitable for electronics and automotive industry.

PVC GUIDE Operating principle

k3frame1
k3frame2
k3frame3

Used direct sprocket method to separate the drive shaft (for door curtain) and axis housing (to collect door curtains) to minimize the door sheet damages. Reliable system.
to minimize the guide deformation and damages in case of collision with the vehicles by using specially designed extruded composite P.V.C. rails. Minimize the gap between tooth and guide which prevents foreign objects and air from entering inside the system.

C-4
Play Video
Model C-4
Format Indoor/Lab
Benefits Product designed based on C-1 base. Lowered noise level by eliminating wind-bars. Used special high speed motor and reach 3m/s. Can install access card
C-5
Play Video
 
Model C-5
Format Clean Room
Benefits The premium auto door system designed for clean room areas equipped with various types of sensors. Suitable for the spaces required to build a complete clean environment. Commonly used in conjunction with an air shower. This model is equipped with COAD hermetic seal which provides tight seal.
C-6
Play Video
Model C-6
Format Car Wash
Benefits This high speed model is designed for car wash businesses which have noise, dust & frost problems. Since the model is designed to link with the existing car wash system, it doesn’t require an additional administration. The system can sustain -10 degrees temperature environment.
C-7
Play Video
Model C-7
Format Hotel parking
Benefits This high speed model is designed for motel parking lots. Equipped with LED lighting on the frame which improves the overall appearance of the door and harmonize with motel’s interior design. Auto door also helps to protect motel customers’ privacy. The doors, coated with indestructable Nano Ink which protects the outer materials from UV and water, have semi-permanent life cycle.
C-8
Play Video
Model C-8
Format Refrigerator/Freezer Model
Benefits This high speed auto door system is designed for refrigerator & freezer units. It can operate at the temperatures between –30℃ ~ +65℃. Airtight sealed and heating hot-wire design ensure the door operate properly at extreme weather conditions. (Exceptional performance under negative/positive pressure)
C-9
Play Video
Model C-9
Foramt Food company
Benefits This high speed auto door system is designed to meet HACCP and gmp requirements for food industry. Equipped with the non-contact sensors and switches to prevent the foreign materials from entering into the system. It is also equipped with the bacteria resistant sheets to blocks the growth of microorganisms.
C-10
Play Video
Model C-10
Format Big Door
ประโยชน์ที่ได้รับ This high speed auto door system is designed for harsh environments. It is 8M products which are applied in heavy industries, shipyards and automotive production lines.
C-11
Play Video
Model C-11
Format Unmanned system
Benefits This high speed auto door system is designed for Unmanned system. The door system integrates with management system . Maximize the space utilization which was created by Tuberon Motor. Neat appearance.
C-12
Play Video
Model C-12
Format Conveyor
Benefits This high speed auto door system is designed for conveyer line environments where massive product movements. It is capable to integrate with the overall conveyer system (robots). With a built-in self-recognition program, it supports a seamless logistics system; and, it also provides the safety and security at the same time.
C-13
Play Video
Model C-13
Foramt Explosion Proof
Benefits This high speed auto door system is designed for the electricity sensitive environments such as paint manufacturing plants and natural gas facilities. Equipped with special flame proof and explosion proof parts to eliminate the risk of explosion.

C-13 Explosion Proof Model

As one of the electrical devices protection methods, the door system is constructed to eliminate the possibility of explosion caused by electrical sparks and rising temperature. 
According to the explosion proof standards, it is required to follow the details on using approved bolts and nuts, couplings, container material strengths, clearance gaps between the parts and explosion tests.
Explosion-Proof Standards
① the container has to have mechanical strengths to withstand the internal blast pressure,
② flame and hot gases generated by the internal explosion should not reach outside the container
③ the external surface temperature of the container should not reach the ignition temperature of the outside gas 
Must meet these three critical conditions
 
Model numberSizeM30 (Switch)#54 (Merer switch unit)
FOB-1120 x 14011
FOB-2120 x 18521
FOB-3120 x 24032
FOB-4120 x 29542
FOB-5120 x 35052
Hyponic

1. Highly efficient perpendicular shaft speed control: about 20% more efficient compared to a worm gear motor, efficiency rate is 85% or higher.
2. Low noise & low vibration: lower noise and vibration compared to bevel type motors (avg. 52 ~ 65dB)
3. High strength and long life: increased gear strengths and life by using carburized gears.
4. Light weight & optimization: reduced the installation space using offset method; and reduced the weight of the case and the speed control unit.

 Horm gearHypoid gearNote
Motor volume(kW)0.40.4 
Reduction ratio10:1 ~ 20:110:1 ~ 20:1 
Efficiency60%85%about 25% difference
Output Torque (kg-m)7.811.0about 25% difference
Size(mm) Including motor416x238x195372x132x118about 50% difference
Weight(kgf) Including motor2011about 50% difference

Altax (for C-2)

1. Boasts the industry’s smallest flange dimensions.
2. Unlike typical concentric shaft gear motor (the output shaft and the motor shaft
oncentric) structure, so it is possible to reduce the flange. In addition to the centers of the motor flange there is no slippage and compact.
3. Decelerate properly on both sides to support a structure, low noise achieved by adopting a number of teeth of the unique dimensions

 Horm gearHypoid gearNote
Motor volume(kW)0.40.4 
Reduction ratio10:1 ~ 20:110:1 ~ 20:1 
Efficiency60%85%about 25% difference
Output Torque (kg-m)7.811.0about 25% difference
Size(mm) Including motor416x238x195372x132x118about 50% difference
Weight(kgf) Including motor2011about 50% difference

Explosion proof

1. Highly efficient perpendicular shaft speed control: about 20% more efficient compared to a worm gear motor, efficiency rate is 85% or higher.
2. Low noise & low vibration: lower noise and vibration compared to bevel type motors (avg. 52 ~ 65dB)
3. High strength and long life: increased gear strengths and life by using carburized gears.
4. Light weight & optimization: reduced the installation space using offset method; and reduced the weight of the case and the speed control unit.

 Horm gearHypoid gearNote
Motor volume(kW)0.40.4 
Reduction ratio10:1 ~ 20:110:1 ~ 20:1 
Efficiency60%85%about 25% difference
Output Torque (kg-m)7.811.0about 25% difference
Size(mm) Including motor416x238x195372x132x118about 50% difference
Weight(kgf) Including motor2011about 50% difference

A Frame Description

-Manufactured using high-strength Aluminum dual extrusion molding method. High resistancy against strong wind and separable by segment
- Convenient & affordable A/S.

B Frame Description

- Round-shaped design improves the overall appearance. WIND LOCK SYSTEM helps to prevents Derailment.

C Frame Description

- Encapsulated bearing design prevents the foreign materials damaging the parts and the rust.

BLUE

ORANGE

GREY

MESH

Transparency

Yellow Transparency

Customizable to meet customers’ requirements

< Antibacterial, flame-retardant, nonwoven articles double layer structure >

-Top grade materials (SOL Screen Coating, high strength) which is used for boat manufacturing 
– No fabric material distortion, no pin-hole, excellent adhesion characteristics
– Surface Treatment/Coating: Fluoride (PVDF), acrylic, PU treatment. Can apply the treatments up to 5 times

Controller Description

1. High performance inverter controller specially designed for high speed auto doors
2. Basic, recovery type, Counter-Balance, including all applicable Doors
3. ENCODER / LIMIT TYPE position control can be combined
4. 1HP ~ 3HP can be applied to the motor
5. The person / vehicle STEP 2 that separates the open control
6. The various interlocking devices (air curtain, conveyors, flashing light) and compatibility available
7. The maximum repellent effect as air curtains and air-conditioning settings associated time
8. Damage caused by external controllers to prevent flooding by rainwater inflow and waterproof CASE
wind-bar type
Self-recovery type(C-3,C-10)